Cam Chain Tensioner

I think we nailed down the problem with compression. CAM CHAIN TENSIONER.

I took it off and it was really stiff to push in and out. It would stick in sometimes too.

This was causing a slack in the timing chain that I beleive was making the valves open prematurely.

I have ordered a new one from Z1 Enterprises.com and am anxious to get it and put it on. Hopefully this will take care of the compression problem, if so, then this baby will be up and running shortly.

I also finally added the oil to the front fork tubes and the seals that I installed seem to be working well.

I almost made the mistake of using the air compressor to put air in them, then the guys caught me. ONLY USE A HAND PUMP ON THIS. It can push way too much pressure into the forks causing damage if you do.

I'll let you all know how it goes and hopefully have some riding shots and footage soon.

Thanks for watching.

Hurry up and wait

The J&P cycles Open house was a huge event. I had to put the bike in a trailer for storage while the event was going on and with a Week of Boy Scout Camp and then a week of family vacation along with all of the other hassles of life I haven't gotten around to working on the bike.

Now I am having a problem with compression. This could be timing, this could be bad rings, I don't know. We are going to dig into it this Sunday and see what is wrong. We are going to work on it again soon to get it finished.

I did get the brake lines cleaned up, filled with fluid and bled. I still need to get fork oil into it.

I'll keep you up to date as things progress.